In order to give you a better service Pepperl+Fuchs uses cookies. By continuing to browse the site you are agreeing to our

 use of cookiesI agree.
Serviceline
Serviceline Industrial Sensors
Sales phone: 0161 622 6308
Tech phone: 0161 622 6311
Fax: 0161 624 6537
Serviceline Explosion Protection
Sales phone: 0161 622 6309
Tech phone: 0161 622 6313
Fax: 0161 624 6537

Process Interfaces


FieldConnex process interfaces connect multiple conventional inputs and outputs to the fieldbus with minimum cabling. Intrinsic safety included: Sensors and actuators can be mounted in Zone 0/ Div. 1, the process interface in Zone 1/ Div. 1. The I/O is powered by the fieldbus, saving on cabling. Process interfaces allow flexibility through standard function blocks and selections from many types and manufacturers of field instruments.


Temperature Multi-Input Device

Fieldbus temperature multi-input device
Fieldbus temperature multi-input device

The FieldConnex® Temperature Multi-Input Device(TM-I) integrates up to eight analog signals into digital fieldbus communication in a very efficient and cost-effective way. The following types of devices and signals can be connected:
  • Resistive temperature sensors, includes 2-, 3- and 4-wire versions
  • Thermocouples
  • Other resistance and millivolt signals

Each input is parameterized separately. The TM-I supports cold junction compensation and monitoring of sensor and wire conditions, too.


Multi-Input Output

FieldConnex® Multi-Input Output (MIO)
FieldConnex® Multi-Input Output (MIO)

The FieldConnex® Multi-Input Output (MIO) provides connection for various disrcete signals to the DCS via fieldbus and one single address. The MIO monitors the status of up to twelve NAMUR sensors or controls up to four valves—including final position feedback and automated partial stroke test. Due to its integrated breakaway and runtime monitoring for valves, an alarm signal is emitted when limit values are exceeded. Alternatively, MIO enables overflow and idle level of containers and conduits monitored by vibration limit switches. All inputs and outputs of Multi-Input Output are intrinsically safe. The MIO serves the exact same functions as FieldConnex valve couplers and binary interfaces and as a drop-in replacement with no reconfiguration required at the PLC or DCS. New and unique is the frequency or pulse input for monitoring of rotating equipment.


FieldConnex® Smartplant® Instrument Library

Download the free fieldbus engineering tool!