Process Interfaces
Group Overview:
Process Interfaces
Process interfaces
FieldConnex process interfaces connect multiple conventional inputs and outputs to the fieldbus with minimum cabling. Intrinsic safety included: Sensors and actuators can be mounted in Zone 0/ Div. 1, the process interface in Zone 1/ Div. 1. The I/O is powered by the fieldbus, saving on cabling. Process interfaces allow flexibility through standard function blocks and selections from many types and manufacturers of field instruments.
Valve coupler
PROFIBUS PA valve coupler
The valve coupler connects up to four low-power valves and positioning sensors to a single fieldbus address. Value-added functions reduce configuration efforts, calculate and report break-away and runtime for each valve. Information is immediately accessible to asset management systems.
Pre-configured solutions such as the FieldConnex® pneumatic interface combine multiple valve couplers, solenoid and amplifier valves in one convenient and easy to install housing. The pneumatic interface will control up to 32 valves via one fieldbus cable and pressurized air.
Pre-configured solutions such as the FieldConnex® pneumatic interface combine multiple valve couplers, solenoid and amplifier valves in one convenient and easy to install housing. The pneumatic interface will control up to 32 valves via one fieldbus cable and pressurized air.
The sensor interface
PROFIBUS PA sensor interface
Up to twelve digital sensors such as NAMUR sensors or electric contacts can be monitored via one fieldbus address. This device is perfect for large number of digital inputs or other signals distributed throughout the plant.
Serviceline Information
Sales phone: 0161 622 6309
Tech phone: 0161 622 6313
Fax: 0161 624 6537
FieldConnex® Smartplant® Instrument Library- Download this library for free and simplify your fieldbus planning!